Contemporary-control-systems EISC Configurable Switches User Manual Instrukcja Użytkownika

EISC Series Ethernet Configurable Switch Hubs User Manual # TD021000-0MB

TD021000-0MB 104.8 Mechanical 4.8.1 16-Port Version 4.8.2 12-Port Version Dimensions of EISC12-100T/FC (below) match those of EISC12-100T/FT.

TD021000-0MB 115 Installation 5.1 Hardware 5.1.1 Mounting The EISC is designed for mounting in an industrial enclosure or wiring closet using eithe

TD021000-0MB 125.1.2 Connecting to Power The EISC requires power via its four-pin connector. The keyed plug is removable and is included with the sw

TD021000-0MB 135.1.2.3 AC Powered The EISC can be powered by an AC voltage in the range of 8-24 V capable of delivering 12 VA of apparent power. Two

TD021000-0MB 145.1.3 Connecting to the Network When attaching network cables to the EISC, Table 1 should be considered. Medium Signaling and Data R

TD021000-0MB 155.1.4 Connecting to the Configuring Device If advanced operation is to be implemented, the Console port must be connected via a null-m

TD021000-0MB 165.2 Software The provided CD-ROM contains : • The EISC Configurator Windows application and set up utility • This User Manual • An

TD021000-0MB 176 Plug-and-Play Operation 6.1 LED Indicators P Power S Fault Relay Status#s Link/Activity This LED glows green when power is supp

TD021000-0MB 187 Advanced Operation 7.1 General Considerations Configuration is accomplished while the EISC is connected to a suitable device — eith

TD021000-0MB 197.2.1 Initial Configuration With a null-modem cable connecting the EISC to a suitable computer, launch the EISC Configurator, select a

TD021000-0MB 2Trademarks Contemporary Controls and CTRLink are registered trademarks of Contemporary Control Systems, Inc. Other product names may be

TD021000-0MB 20 Figure 14 — EISC Ready for Configuration Used to connect to console port Displays configuration of each portIf port monitoring is en

TD021000-0MB 217.2.2 Setup Options The Setup pull-down menu offers the options shown in Figure 15: Set the Individual Port Behaviors Define How the F

TD021000-0MB 227.2.4 Configuring the Port Monitor Figure 18 displays the features of the Port Monitor which can watch each port for a fault condition

TD021000-0MB 237.2.6 Advanced Features 7.2.6.1 Port Trunking Port Trunking allows four ports to be grouped together with the resulting group behavin

TD021000-0MB 247.2.6.2 Port-Based VLAN Function In the Advanced Settings window, port-based (also called Layer 1) VLAN functionality can be selected

TD021000-0MB 257.2.6.3 Global Features 7.2.3.6.1 Broadcast Storm Control The EISC can enable or disable broadcast storm filtering. When enabled, ea

TD021000-0MB 26If a port receives a high-priority frame, flow controlcan be disabled for 1–2 seconds and automatically re-enabled after no priority f

TD021000-0MB 27When this EISC option is enabled, VLAN“tagged” frame priority is recognized. In the data link header, the 802.1p supplementprovides p

TD021000-0MB 28After configuring the EISC, the new parameterswill apply, but only so long as the switch haspower. If it is desired to retain setting

TD021000-0MB 297.2.10 Port Signal Strength The EISC can display the signal strength received at its RJ-45 ports in four graduated steps. Each port d

TD021000-0MB 31 Table of Contents 1 TABLE OF CONTENTS ...

TD021000-0MB 308 Service 8.1 Warranty Contemporary Controls (CC) warrants its product to the original purchaser for one year from the product’s ship

TD021000-0MB 318.3 Warranty Repair Products under warranty that were not subjected to misuse or abuse will be repaired at no charge to the customer.

TD021000-0MB 329 Appendices 9.1 Declaration of Conformity 9.1.1 Applied Council Directives: Electromagnetic Compatibility Directive, 89/336/EEC Cou

TD021000-0MB 339.2 Modbus Operation For Modbus operation, the EIA-232 parameters must be set as follows : Baud Rate = 9600 bps, Data Bits = 8, St

TD021000-0MB 34[40017-40128: Port Settings port 17 – port 128 reserved] 40129: Reserved for future use 40130: Reserved for future use 40131: Reser

TD021000-0MB 3540150: QOS Settings (all disabled by default) Bit 6: Enable Flow Control Automatic disable Bit 5: Enable DiffServ Priority QOS Bit

TD021000-0MB 369.3.2 READ Only 41001-41016: Port 1-16 status: Bit 0: Duplex (0 = half, 1= full) Bit 1: Speed (0 = 10Mbps, 1 = 100Mbps) Bit 2:

TD021000-0MB 47 ADVANCED OPERATION ... 18 7.1 General Con

TD021000-0MB 52 Introduction The EISC configurable switch in the CTRLink® family provides capabilities beyond those found in standard Plug and Play (

TD021000-0MB 63 Versions of the EISC Figure 1 — The EISC Family EISC16-100T EISC12-100T/FC EISC12-100T/FT

TD021000-0MB 74 Specifications 4.1 Electrical Input Voltage ...10-36 VDC ... 8-24 VAC Inpu

TD021000-0MB 84.4 RJ-45 Connector Pin Assignments PIN MDI-X Port 16X 1 TD+ RD+ 2 TD– RD– 3 RD+ TD+ 6 RD– TD– (All other pins are unused.) 4.5 C

TD021000-0MB 94.7 Compliance Compatibility Compliant with ANSI/IEEE 802.3 Regulatory Compliance CE Mark FCC Part 15 Class A UL 508 Listed, Indu