Contemporary-control-systems EIPR Wired/Wireless VPN Router Installation Guide Instrukcja Użytkownika Pobierz pdf

EIPR Series

Skorpion Wired and Wireless VPN Routers

Installation Guide

The EIPR Series provides routing between a wide-area-network (WAN) and a local-area-

network (LAN) — which features a four-port 10/100 Mbps Ethernet switch. The two models

are identical except for their USB port functions. The EIPR-E can act as a Wi-Fi access

point with the connection of a Wi-Fi adapter. The EIPR-V does the same, but the USB port

can also support a cellular adapter for wireless WAN communication (in which case the

wired WAN port is automatically deactivated). The EIPR-V also adds virtual private

network (VPN) firmware and a real-time clock — so that it can function as a VPN client.

Each port automatically negotiates with connected devices. Thus, the EIPR can provide

plug-and-play operation with no configuration unless required for advanced routing features

or when non-default operating parameters are required. In these cases, default behaviour

can be modified from a LAN port via its built-in web server located at 192.168.92.1. By

default, its WAN port is assigned an IP address via the built-in DHCP client. An internal

DHCP server assigns IP addresses to LAN-connected devices. Through its WAN port, the

built-in DNS forwarder passes DNS requests from a LAN host to a remote DNS server.

Powering. An internal half-wave rectifier allows sharing a common AC power source with other

half-wave devices. Voltage must deliver current commensurate with 9 VA power consumption.

Power conductors should be 16–22 AWG (solid) or 16–18 AWG (stranded). Common is

connected to 0 V. Chassis is isolated from 0 V. Inputs are reverse-polarity protected.

1 2 3 4

Podsumowanie treści

Strona 1 - EIPR Series

EIPR Series Skorpion Wired and Wireless VPN Routers Installation Guide The EIPR Series provides routing between a wide-area-network (WAN) and a local-

Strona 2 - Specifications

Mechanical LED Indicators The “PWR” LED glows solid green when the unit is properly powered. Each Ethernet port has two LEDs: LED “L” glows soli

Strona 3

Wired Network Connections Auto-MDIX allows connections to other equipment with either crossover or straight-through cabling.Initial Access Setup.

Strona 4

Reset Switch. The Reset Switch (located just below the Power LED) will restore factory default settings including the IP address, netmask and

Komentarze do niniejszej Instrukcji

Brak uwag

Contemporary-control-systems EIPR Wired/Wireless VPN Router Installation Guide Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Sprzęt komputerowy Contemporary-control-systems EIPR Wired/Wireless VPN Router Installation Guide. Contemporary Control Systems EIPR Wired/Wireless VPN Router Installation Guide User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Contemporary-control-systems EIPR Wired/Wireless VPN Router Installation Guide